 |
|
|
|
|
Features and Benefits
- Three simultaneous video streams for MPEG4 and MJPEG
- Video stream up to 30/25 frames/sec at full D1 (NTSC:720 x 480; PAL:720x576) resolution
- Video latency under 200 ms
- 2 Ethernet ports for cascade and Ethernet port redundancy
- Local storage capability with SD card slot
- Industrial design with -40 to 75°C operating temperature (available soon)
- Free VPort SDK PLUS supported
Introduction
The Moxa VPort 451 is a 1-channel industrial video encoder with MJPEG and MPEG4 video compression that provides up to 3 video streams (2 MPEG4, 1 MJPEG) simultaneously. The video streams can be used for different purposes, such as viewing, recording, and analyzing. In addition, a video latency under 200 milliseconds makes the Moxa VPort 451 the optimal solution for mission-critical video applications, for which a real-time video display is key. In addition, the industrial rugged design, which includes a -40 to 75°C operating temperature, built-in fiber Ethernet ports, IP30 form factor protection, and industrial certifications, makes the VPort 451 superbly suitable for harsh environments.
| • Video: | |
| Video Compression | MJPEG, MPEG4 (ISO/ IEC 14496-2) |
| Video Inputs | 1, BNC connector |
| Video Outputs | over Ethernet |
| NTSC/PAL | Auto-sensing or manual |
| Video Viewing | • Adjustable image size and quality • Timestamp and text overlay |
| Video Stream | Max. of 3 video streams (2 encoders: 1 for MPEG4, 1 for MPEG4 and MJPEG) |
| • Video Resolution and FPS (frames per second): | |
| Video Resolution and FPS (frames per second) for a single stream |  |
| Video Viewing | • Adjustable image size and quality • Timestamp and text overlay |
| • Audio: |
|
| Audio Input |
1 Line-in or MIC-in with 3.5 mm phone jack |
| Audio Output |
1 Line-out with 3.5 mm phone jack |
| Audio Format | Mono, PCM |
| • Network: | |
| Protocols |
TCP, UDP, HTTP, SMTP, FTP, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS, Modbus/TCP |
| Ethernet | 2 10/100BaseT(X) auto negotiating RJ45 ports |
| • serial: |
|
| PTZ Port | 1, RS-232/422/485 port (terminal block connector), max. speed of 115.2 Kbps |
| Console Port |
1 RS-232 RJ45 port |
| COM Ports | 1, RS-232/422/485 (DB9 female connector), max. speed of 115.2 Kbps |
| • GPIO: | |
| Digital Inputs | 2, max. 8 mA High: +13 to +30 V; Low: -30 to +3 V |
| Relay Outputs | 2, max. 24 VDC @ 1 A |
| • Local storage: |
|
| SD Socket | Standard SD socket, V2.0 (SDHC) |
| • LED Indicators: |
|
| PWR1 | Power 1 |
| PWR2 | Power 2 |
| Fault | Can be configured to correspond to system alarm, power failure, or disconnected network |
| VIDEO | Video input signal |
| PTZ | PTZ control signal |
| SD | SD card operation |
| • Physical Characteristics: | |
| Enclosure |
Metal, IP30 protection |
| Weight | 900 g |
| Dimensions | 52.98 x 135 x 105 mm (2.09 x 5.31 x 4.13 in) |
| Installation |
DIN-Rail mounting, wall mounting (with optional kit) |
| • Power Requirements: | |
| Input Voltage |
2 24 VDC/VAC power inputs for redundancy |
| Power Consumption | Approx. 5.5 W |
| • alarms: |
|
| Video Motion Detection | Includes sensitivity tuning |
| Video Loss | Video loss alarm |
| Scheduling | Daily repeat timing schedule |
| Imaging | JPEG snapshots for pre/trigger/post alarm images |
| Email/FTP Messaging | Automatic transfer of stored images via email or FTP with event-triggered actions |
| Custom Alarms | HTTP event servers and CGI events for setting customized alarm actions |
| • pan/tilt/zoom |
|
| PTZ Camera Control | Via RS-232/422/485 PTZ port or COM port |
| PTZ Control Functions | PAN, TILT, ZOOM, FOCUS, moving speed, preset position (max. 25 positions), and 24 custom commands |
| PTZ Function Updates | Driver upload supported |
| Supported Device Protocols | Pelco D, Pelco P, Dynacolor DynaDome, Cohu, Custom Camera |
| Transparent PTZ Control | Control PTZ cameras with legacy PTZ control panel or keyboard connected to a PC or VPort decoder |
| • security |
|
| Password | User level password protection |
| Filtering | By IP address |
| • Environmental Limits: |
|
| Operating Temperature |
Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| • standards and certifications: |
|
| EMI | FCC Part 15 Subpart B Class A, EN 55022 Class A |
| EMS | EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3, EN 61000-4-8, EN 61000-4-11 |
| Traffic Control | NEMA TS2 Section 2 (Pending) |
| Shock |
IEC60068-2-27 |
| Freefall | IEC60068-2-32 |
| Vibration |
IEC60068-2-6 |
| • mtbf (mean time between failures) |
|
| Time | 375,000 hrs |
| Database | Telcordia (Bellcore), GB 25°C |
| • Warranty: |
|
| Warranty Period |
5 years |
| Details | See www.moxa.com/warranty |
| • system requirements |
|
| CPU |
Pentium 4, 2.4 GHz or above |
| Memory | 512 MB memory or above |
| OS | Windows XP/2000 with SP2 or above |
| Browser | Internet Explorer 6.x or above |
| Multimedia | DirectX 9.0c or above |
| • software bundled free |
|
| VPort SDK PLUS | Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third-party developers (the latest version of SDK is vailable for download from Moxa’s website). |
Available Models
| Ordering Info | Model No. | Description |
| Click here to order |
VPort 451 |
1-channel MJPEG/MPEG4 industrial video encoder with 2 10/100BaseT(X) ports, 0 to 60°C operating temperature |
IP Surveillance Software
| Ordering Info | Model No. | Description |
| Click here to order |
SoftNVR-IA |
32-channel IP video surveillance software designed for industrial automation |
| Click here to order |
SoftCMS |
100/200/500-channel central management software for large scale surveillance systems |
