 |
|
|
|
Active Ethernet I/O Features and Benefits
- Instant event messaging by TCP/UDP/e-mail/SNMP trap
- DI counter saving when power off
- Easy-to-use Click&Go™ Logic for local output control
- 12-point 24 VDC digital input with counter
- 8-point 24 VDC digital output with pulse output
- PC-based configuration utility and web console
- I/O control over Modbus/TCP and SNMP protocol
- Windows/WinCE VB/VC and Linux C API
- Peer-to-Peer I/O without controller
Introduction
Simple Applications without Programming
The Moxa ioLogik E2210 makes the trigger event result in digital alarm output directly. Using the ioAdmin UI to setup by “IF-THEN” logic rules, without the needs to write program of PC or Controllers to make it true.
Software Event Counter Input and Pulse Output
Each digital input can be independently configured for DI or event counter mode, and the output can be independently configured for DO or pulse output mode.
| • LAN: | |
| Ethernet | 10/100Mbps, RJ45 |
| Protection | 1.5KV magnetic isolation |
| Protocols | Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP(MIB for I/O and Network), HTTP, SNTP |
| • Serial: | |
| Interface | RS-485-2w: Data+, Data-, GND |
| Serial Line Protection | 15KV ESD for all signals |
| • Serial Communication Parameters: | |
| Data Bits | 8 |
| Stop Bits | 1 |
| Parity | None |
| Flow Control | None |
| Protocols | Modbus/RTU |
| Speed | 1200 to 115200 bps |
| • Digital Input: | |
| Channels | 12, source type |
| I/O Mode | DI or Event Counter (up to 900 Hz) |
| Dry Contact | Logic 0: short to GND Logic 1: open |
| Wet Contact | Logic 0: 0 to 3 VDC, Logic 1: 10 to 30 VDC (DI COM to DI) |
| Common Type | 12 points per COM |
| Isolation | 3K VDC or 2K Vrms |
| • Digital Output: | |
| Channels | 8, sink type, 45 VDC, 200 mA |
| I/O Mode | DO or Pulse Output (up to 100 Hz) |
| On-State Voltage | 24 VDC nominal |
| Output Current Rating | Max. 200 mA per channel |
| Protection | Over-temperature shutdown: min. 175°C Over-current limit: typ. 400 mA/channel |
| Isolation | 3K VDC per 2K Vrms |
| • Physical Characteristics: | |
| Wiring | I/O cable max. 14AWG |
| • Environmental Limits: | |
| Operating Temperature | -10 to 60°C (14 to 140°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| • Power Requirements: | |
| Power Input | 24 VDC nominal, 12 to 48 VDC |
| DO Power | 24 VDC nominal, up to 30 VDC |
| • Agency Approvals: | |
| EMI | FCC Part 15, CISPR (EN55022) class A |
| EMS | IEC 61000-4, IEC 61000-6 |
| Safety | UL508 |
| Shock | IEC 60068-2-27 |
| Freefall | IEC 60068-2-32 |
| Vibration | IEC 60068-2-6 |
| • Warranty: | |
| Warranty Period | 5 years |
| Details | See www.moxa.com/warranty |
Active Ethernet I/O
| Ordering Info | Model No. | Descritpion |
| Click here to order | LCD module with 16 x 2 text display and 5 buttons | |
| Click here to order |
ioLogik E2210 |
Active Ethernet I/O with 12 digital inputs and 8 digital outputs |
