 |
|
|
|
|
Features and Benefits
- World’s lowest power consumption
- Speedy 3-step web-based configuration
- Surge protection for serial, Ethernet, and power lines
- COM port grouping and UDP multicast applications
- Screw connectors for secure installation
- Dual DC power inputs with power jack and terminal block
- Versatile TCP and UDP operation modes
Overview
The Moxa NPort 5200A serial device servers are designed to make serial devices network-ready in an instant and give your PC software direct access to serial devices from anywhere on the network. The Moxa NPort 5200A device servers are ultra lean, ruggedized, and user friendly, making simple and reliable serial to Ethernet solutions possible.
A Greener Serial-to-Ethernet Solution
The Moxa MiiNe is a small but powerful ARM-based serial-to-Ethernet SoC with RAM and Flash embedded. With the MiiNe inside, the NPort 5200A series becomes the lowest power consumption device server in the world. The Moxa NPort 5200A series saves at least 50% on power consumption compared to existing solutions on the market, helping engineers meet the tough environmental compliance challenges found in today’s industrial environments.
Surge-protected Serial, Ethernet, and Power Lines
Surge, which is typically caused by high voltages that result from switching and lightning transients, is a common threat to all electrical devices. Moxa’s leading-edge surge immunity solution, which is applied to the Moxa NPort 5200A’s serial, power, and Ethernet lines, is tested and proven compliant with IEC 61000-4-5. This state-of-the-art surge protection provides a robust serialto-Ethernet solution that can protect electrical devices from voltage spikes and withstand electrically noisy environmental conditions.
3-Step Web-based Configuration
The NPort 5200A’s 3-step web-based configuration tool is straightforward and user-friendly. The NPort 5200A’s web console guides users through 3 simple configuration steps that are necessary to activate the serial-to-Ethernet application. With this speedy 3-step web-based configuration, a user only needs to spend an average of 30 seconds to complete the NPort settings and enable the application, saving a great amount of time and effort.
COM Port Grouping
The NPort 5200A’s COM Grouping function allows you to create a COM Group and redirect data from it to several physical COM ports on NPort device servers. With COM Grouping, you will be able to control multiple physical serial ports simultaneously by operating only one COM port.
| • Ethernet Interface | |
| Number of Ports | 1 |
| Speed | 10/100 Mbps, auto MDI/MDIX |
| Connector(s) | 8-pin RJ45 |
| Magnetic Isolation Protection | 1.5 KV built-in |
| Ethernet Line Protection | Level 2 Surge, EN61000-4-5 |
| • Serial Interface | |
| Number of Ports | 2 |
| Serial Standards | NPort® 5210A: RS-232 NPort® 5230A: RS-422/485 NPort® 5250A: RS-232/422/485 |
| Connector(s) | NPort 5210A/5250A: DB9 male NPort 5230A: Terminal Block (5 pins per port) |
| Serial Line Protection |
15 KV ESD protection for all signals, EN61000-4-5 (Surge) Level 1 |
| RS-485 Data Direction Control | ADDC® (automatic data direction control) |
| Pull High/Low Resistor for RS-485 |
1 KΩ, 150 KΩ |
| • Serial Communication Parameters | |
| Data Bits | 5, 6, 7, 8 |
| Stop Bits | 1, 1.5, 2 |
| Parity | None, Even, Odd, Space, Mark |
| Flow Control | RTS/CTS and DTR/DSR (RS-232 only), XON/XOFF |
| Baudrate | 50 bps to 921.6 Kbps |
| • Serial Signals | |
| RS-232 |
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
| RS-422 | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-4w | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-2w | Data+, Data-, GND |
| • Software | |
| Network Protocols |
ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, IGMP V1/2 |
| Configuration Options |
Web Console (with new Quick Setup), Serial Console (NPort 5210A/5250A only), Telnet Console, Windows Utility |
| Windows Real COM Drivers | Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7 x86/x64 |
| Fixed TTY Drivers | SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac 10.3 |
| Linux Real TTY Drivers | Linux kernel 2.4.x, 2.6.x |
| • Physical Characteristics | |
| Housing | Metal |
| Weight | 340 g |
| Dimensions | Without ears: 77 x 111 x 26 mm (3.03 x 4.37 x 1.02 in) With ears: 100 x 111 x 26 mm (3.94 x 4.37 x 1.02 in) |
| • Environmental Limits | |
| Operating Temperature | Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Operating Humidity | 5 to 95% RH |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| • Power Requirements | |
| Input Voltage | 12 to 48 VDC |
| Power Consumption | 119 mA @ 12V, 65 mA @ 24V |
| • standards and certifications |
|
| Safety | UL 60950-1, EN 60950-1 |
| EMC |
CE, FCC |
| EMI | EN 55022 Class A, FCC Part 15 Subpart B Class A |
| EMS | EN 55024 |
| Power Line Protection | EN61000-4-4 (EFT) Level 2, EN61000-4-5 (Surge) Level 3 |
| • Reliability | |
| Automatic Reboot Trigger |
Built-in WDT (watchdog timer) |
| MTBF (mean time between failures) | 847,750 hrs |
| • Warranty | |
| Warranty Period |
5 years |
| Details | See http://www.moxa.com/support/warranty.htm |
| Ordering Info | Model No. | Description |
| Click here to order |
NPort 5210A |
2-port RS-232 device server, 0 to 60°C operating temperature |
| Click here to order |
NPort 5230A |
2-port RS-422/485 device server, 0 to 60°C operating temperature |
| Click here to order |
NPort 5250A |
2-port RS-232/422/485 device server, 0 to 60°C operating temperature |
| Click here to order |
NPort 5210A-T |
2-port RS-232 device server, -40 to 75°C operating temperature |
| Click here to order |
NPort 5230A-T |
2-port RS-422/485 device server, -40 to 75°C operating temperature |
| Click here to order |
NPort 5250A-T |
2-port RS-232/422/485 device server, -40 to 75°C operating temperature |
| Ordering Info | Model No. | Description |
| Click here to order |
PWR-12150-AU-T1 |
12V1.5A, -40 to 75°C operating temperature, Screw type AC power jack, AU plug |
| Ordering Info | Model No. | Descritpion |
| Click here to order | DIN-Rail Mounting Kit (35 mm) |
