 |
|
|
|
Features and Benefits
- MOXA ART ARM9 32-bit 192 MHz processor running Linux 2.6
- 32 RAM, and 16 MB flash disk on board
- 802.11a/b/g WLAN with repeater function
- WEP, WPA, and WPA2 encryption
- 10/100 Mbps Ethernet for network redundancy
- SD socket for storage expansion
- DIN-rail or wall-mount installation
- Designed to withstand 5 g's of continuous vibration and 50-g shocks
- Robust, fan-less design
Overview
The Moxa W321 is an embedded Linux computer that features 2 software selectable RS-232/422/485 ports, and support the IEEE 802.1a/b/g standards for WLAN connections. In addition, the computer has 1Ethernet port, and comes with an SD socket for storage expansion.The W321's Linux OS runs on the MOXA ART 32-bit ARM9 processor,and provides a powerful and reliable platform for harsh, industrial environments. You will find these computers ideal for a variety of machine-to-machine applications, including data acquisition, protocol conversion, and remote device control and monitoring.
| • Computer | |
| CPU | MOXA ART ARM9 32-bit 192 MHz |
| OS (pre-installed) | Embedded Linux with MMU support |
| DRAM | 32 MB |
| Flash | 16 MB |
| Storage Expansion | SD socket |
| • LAN Interface | |
| Ethernet |
Auto-sensing 10/100 Mbps, RJ45 connector |
| Magnetic Isolation Protection | 1.5 KV built-in |
| • WLAN Interface |
|
| Standard Compliance |
802.11a/b/g |
| Tx Power | (typical) 5.15-5.35 GHz: 14 dBm @ 6 Mbps, 14 dBm @ 54 Mbps 5.725-5.825 GHz: 14 dBm @ 6 Mbps, 13 dBm @ 54 Mbps 2.412-2.483 GHz (802.11g): 17 dBm @ 6 Mbps, 15 dBm @ 54 Mbps 2.412-2.472 GHz (802.11b): 18 dBm @ 1-11 Mbps |
| RX Sensitivity | (typical) 5.15-5.35 GHz: 6 Mbps @ -82 dBm, 54 Mbps @ -67 dBm 5.47-5.725 GHz: 6 Mbps @ -82 dBm, 54 Mbps @ -67 dBm 5.725-5.825 GHz: 6 Mbps @ -80 dBm, 54 Mbps @ -69 dBm 2.412-2.472 GHz (802.11g): 6 Mbps @ -84 dBm, 54 Mbps @ -69 dBm 2.412-2.472 GHz (802.11b): 11 Mbps @ -82 dBm, 1 Mbps @-90 dBm |
| Radio Frequency Type | DSSS, CCK, OFDM |
| Radio Frequency Band | 802.11b/g: U.S., Europe, Japan products, covering 2.4-2.484 GHz |
| Media Access Protocol | CSMA/CA (Carrier Sense Multiple Access with Collision Avoidance) |
| Transmission Rate | 54 Mbps (max.) with auto fallback (54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbps) 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11b: 1, 2, 5.5, 11 Mbps |
| Transmission Distance | Up to 100 meters (@ 11 Mbps in open areas) |
| Wireless Security | RS-232/422/485, software-selectable |
| WLAN Modes | Ad-hoc (802.11b/g), Infrastructure |
| Antenna | External 2 dbi dipole antenna |
| Antenna Connector | Reverse SMA |
| • Serial Interface |
|
| Serial Standards | RS-232/422/485 (software-selectable) |
| Number of Ports | 2 |
| Connectors |
DB9 male |
| Serial Line Protection | 15 KV ESD protection for all signals |
| Console Port | RS-232 interface (TxD, RxD, GND with 4-pin pin header output) |
| • Serial Communication Parameters | |
| Baudrate | 50 bps to 921.6 Kbps (non-standard baudrates supported; see user's manual for details) |
| Data Bits | 5, 6, 7, 8 |
| Stop Bits |
1, 1.5, 2 |
| Parity | None, Even, Odd, Space, Mark |
| Flow Control | RTS/CTS, XON/XOFF, ADDC™ (automatic data direction control) for RS-485 |
| • Serial Signals | |
| RS-232 |
TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND |
| RS-422 | TxD+, TxD-, RxD+, RxD-, GND |
| RS-485-4w | TxD+, TxD-, RxD+, RxD-, GND |
| RS-485-2w | Data+, Data-, GND |
| • LEDs |
|
| System |
Ready |
| LAN | 10M/Link, 100M/Link (on connector) |
| Serial | TxD, RxD |
| WLAN |
Enable, Signal Strength |
| • Switches and Buttons | |
| Buttons | Reset button for resetting to factory defaults |
| • Physical Characteristics |
|
| Enclosure | Aluminum (1 mm) |
| Weight | 185 g |
| Dimensions | 77 x 111 x 26 mm (3.03 x 4.37 x 1.02 in) |
| Mounting | DIN-rail (requires optional DK-35A DIN-rail kit), wall |
| • Environmental Limits | |
| Operating Temperature | -10 to 60°C (14 to 140°F) |
| Operating Humidity |
5 to 95% RH |
| Storage Temperature | -20 to 80°C (-4 to 176°F) |
| Anti-Vibration | 5 g's @ IEC-68-2-6, sine wave, 5-500 Hz, 1 Oct./min, 1 hr/axis |
| Anti-Shock | 50 g's @ IEC-68-2-6, half-sine wave, 30 ms |
| • Power Requirements | |
| Input Voltage | 12 to 48 VDC |
| Power Consumption | 400 mA @ 12 VDC, 4.8 watts |
| • Regulatory Approvals | |
| Safety | UL/cUL (UL60950-1), TŰV (EN60950-1) |
| EMC | CE (ETSI EN 301 489-1/-17, ETSI EN 301 893, ETSI EN 300 328, EN50392), FCC Part 15C & Part 15E |
| Directives | RoHS, CRoHS, WEEE |
| • Reliability | |
| Alert Tools | Built-in buzzer and RTC (real-time clock) with battery backup |
| Automatic Reboot Trigger |
Built-in WDT (watchdog timer) supporting 1-255 level time interval system reset, software programmable |
| • Warranty | |
| Warranty Period |
5 years |
| Details | See www.moxa.com/warranty |
| • lINUX |
|
| Kernel Version | 2.6.9 |
| Boot Loader | Redboot |
| Protocol Stack |
TCP, UDP, IPv4, SNMP V1, ICMP, IGMP, ARP, HTTP, CHAP, PAP, SSH 1.0/ 2.0, SSL, DHCP, NTP, NFS, SMTP, Telnet, FTP, PPP, PPPoE |
| File System | JFFS2 (on-board flash) |
| System Utilities |
bash, busybox, tinylogin, telnet, ftp, scp |
| Supported Services and Daemons | telnetd: Telnet Server daemon ftpd: FTP server daemon sshd: Secure shell server Apache: Web server daemon, supporting PHP and XML OpenVPN: Virtual private network service manager iptables: Firewall service manager pppd: dial in/out over serial port daemon & PPPoE snmpd: snmpd agent daemon inetd: TCP server manager program |
| Application Development Environment | MOXA Linux API Library Linux Tool Chain: Gcc, Glibc, GDB BINEncryptor: Encryption tool for binary files; based on Moxa Intellectual Protection Technology (Patented) |
| Device Drivers | UART, RTC, Buzzer, SD Card |
Wireless Embedded Computers
| Ordering Info | Model No. | Description |
| Click here to order |
W321-LX |
Mini RISC-based Ready-to-Run Wireless Embedded Computer with 2 Serial Ports, LAN, SD, Linux OS |
