 |
|
|
|
|
Features and Benefits
› Transmits up to 2 km over optical fiber
› Converts CAN signals to fiber and fiber to CAN signals
› Baudrate up to 1 Mbps
› Dual power inputs for redundancy
› DIP switch for 120 Ω terminal resistance
› DIP switch for fiber test mode
› LEDs for Fiber TX, Fiber RX, Power 1, Power 2
› Wide temperature model available for -40 to 85°C environments
› Fully compatible with the ISO 11898 standard
Introduction
The Moxa ICF-1170I series CANbus-to-fiber converters are used to convert CAN signals from copper to optical fiber. The converters come with 2 KV optical isolation for the CANbus system and dual power inputs with alarm contact relay to ensure that your CANbus system will remain online.
Fiber Test Mode
Fiber Test Mode can be used to test the fiber cable between two ICF-1170I units, and provides a simple way to determine if the fiber cable is transmitting data correctly. When in Fiber Test Mode, the fiber transceiver (TX) will continuously send out a data signal and the "Fiber TX" LED will light up. On the other side of the connection, when the ICF-1170I fiber transceiver (RX) receives the data signal form the TX side, the "Fiber RX" LED will light up.
| • CAN COMMUNICATION: |
|
| CANbus Interface | ISO 11898-2, Terminals (CAN_H, CAN_L,CAN_ GND) |
| Protocols | CAN 2.0A and 2.0B (ISO 11898-2) |
| Connector Type |
3-pin removable screw terminal x1 |
| Termination Resistor | Dip switch selector for 120 Ω terminal resistor |
| Baudrate | Up to 1 Mbps |
| System Delay | 150 ns |
| Isolation Protection | 2 KV |
| Transmission Distance | Max 2 km (depends on the data rate and the protocol used) |
| LED Indicators | PWR1, PWR2, Fiber TX, Fiber RX |
| Note | The transmission distance is limited by the signal rate, as mentioned in the ISO 11898-2 standard |
| • FIBER COMMUNICATION: | |
| Fiber Connector | ST (multi-mode) fiber ports x 2 |
| Support Cable | 50/125, 62.5/125, or 100/140 μm (multi-mode) |
| Wavelength | 850 nm |
| Tx Output | Multi-mode (> -5 dBm) |
| RX Sensitivity | Multi-mode (-20 dBm) |
| • pHYSICAL CHARACTERISTICS: | |
| Housing |
Aluminum (1 mm) |
| Weight | Product only: 175 g (0.39 lb) Packaged: 320 g (0.71 lb) |
| Dimensions | 30.3 x 70 x 115 mm (11.9x27.6x45.3 in) |
| • ENVIRONMENTAL LIMITS: | |
| Operating Temperature |
Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 85°C (-40 to 185°F) |
| Operating Humidity | 5 to 95% RH |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| • Power requirements: | |
| Input Voltage |
12 to 48 VDC dual power inputs for redundant power |
| Power Consumption | ICF-1170I: 221 mA @ 12 V Alarm Contact: 1 relay output with current carrying of 1 A @ 24 VDC |
| Voltage Reversal Protection | Protects against V+/V- reversal |
| Over Current Protection | 1.1 A (protects against two signals shorted together) |
| • REGULATORY Approvals: | |
| EMI | EN55022 1998, Class A |
| EMS | EN61000-4-2 (ESD), Criteria B, Level 4 EN61000-4-3 (RS), Criteria A, Level 2 EN61000-4-4 (EFT), Criteria B, Level 4 EN61000-4-5 (Surge), Criteria B, Level 2 EN61000-4-6 (CS), Criteria B, Level 2 En61000-4-8 (PFMF), Criteria A, Level 3 |
| UL/CUL | UL-508 |
| TUV | EN 60950-1 |
| CE | Class A |
| FCC | Part 15 sub Class A |
| Freefall | IEC 60068-2-32 |
| MTBF | 792085 hrs |
| • Warranty: | |
| Warranty Period |
5 years |
| Details | See www.moxa.com/warranty |
| Ordering Info | Model No. | Description |
| Click here to order |
ICF-1170I-M-ST |
CANbus to fiber converter, multi-mode, ST connector, 0 to 60°C |
| Click here to order |
ICF-1170I-M-ST-T |
CANbus to fiber converter, multi-mode, ST connector, -40 to 85°C |
