 |
|
|
|
|
Features and Benefits
- IEEE 802.11a/b/g compliant
- Dual-RF design for redundant wireless communication and high-performance wireless bridging
- RSTP for dual Ethernet redundancy
- Supports 100 ms redundant roamig
- Industrial grade QoS (WMM) and VLAN supported
- EN 50155 and EN 50121-1/4 compliant
- Rugged IP68-rated housing and -40 to 75°C operating temperature
Introduction
Moxa’s AWK-6222 outdoor wireless AP/bridge/client avoids interruptions in WLAN transmissions with its dual 2.4/5 GHz RF modules, which allow two independent wireless connections over different frequencies. To maximize wireless and wired network availability, the AWK-6222 can incorporate Ethernet redundancy using RSTP, and power redundancy using dual DC power inputs and PoE. In addition, the AWK-6222 is housed in an IP68 metal casing with M12 connectors for total protection against dust, water, vibration, and other environmental effects. This rugged unit supports seamless roaming to achieve ultra-reliable and redundant wireless networks under challenging outdoor, mobile conditions. These industrially hardened features let you set up a rock-solid WLAN to ensure that your entire network will always be in service.
Ruggedized Design for Critical Environments
- PoE and dual DC power inputs
- Dual RF design with 2.4 or 5 GHz dual-band operation for redundant WLAN connections
- Redundant roaming for fast and stable handoff
- Ethernet redundancy via RSTP
Redundancy to Increase System Reliability
- IP68-rated metal housing and -40 to 75°C wide operating temperature
- Long-distance wireless transmission over 10 km
- Anti-vibration M12 design and waterproof/dust-tight RJ45 connectors
- Wall, DIN-Rail, and pole mounting options for versatile outdoor installation
| • WLAN: | |
| Standards | IEEE 802.11a/b/g/h for Wireless LAN IEEE 802.11i for Wireless Security IEEE 802.3u for 10/100BaseT(X) IEEE 802.3af for Power-over-Ethernet IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1Q VLAN |
| Spread Spectrum and Modulation (typical) | • DSSS with DBPSK, DQPSK, CCK • OFDM with BPSK, QPSK, 16QAM, 64QAM • 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBPSK @ 11 Mbps • 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps, QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps |
| Operating Channels (central frequency) | US: 2.412 to 2.462 GHz (11 channels) 5.18 to 5.24 GHz (4 channels) EU: 2.412 to 2.472 GHz (13 channels) 5.18 to 5.24 GHz (4 channels) JP: 2.412 to 2.472 GHz (13 channels, OFDM) 2.412 to 2.484 GHz (14 channels, DSSS) 5.18 to 5.24 GHz (4 channels for W52) |
| Security | • SSID broadcast enable/disable • Firewall for MAC/IP/Protocol/Port-based filtering • 64-bit and 128-bit WEP encryption, WPA/WPA2 Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP and AES) |
| Transmission Rates | 802.11b: 1, 2, 5.5, 11 Mbps 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| Transmit Power | 802.11b: Typ. 23±1.5 dBm @ 1 to 11 Mbps 802.11g: Typ. 20±1.5 dBm @ 6 to 24 Mbps, Typ. 19±1.5 dBm @ 36 Mbps, Typ. 18±1.5 dBm @ 48 Mbps, Typ. 17±1.5 dBm @ 54 Mbps 802.11a: Typ. 18±1.5 dBm @ 6 to 24 Mbps, Typ. 16±1.5 dBm @ 36 to 48 Mbps, Typ. 15±1.5 dBm @ 54 Mbps |
| RX Sensitivity | 802.11b: -97 dBm @ 1 Mbps, -94 dBm @ 2 Mbps, -92 dBm @ 5.5 Mbps, -90 dBm @ 11 Mbps 802.11g: -93 dBm @ 6 Mbps, -91 dBm @ 9 Mbps, -90 dBm @ 12 Mbps, -88 dBm @ 18 Mbps, -84 dBm @ 24 Mbps, -80 dBm @ 36 Mbps, -76 dBm @ 48 Mbps, -74 dBm @ 54 Mbps 802.11a: -90 dBm @ 6 Mbps, -89 dBm @ 9 Mbps, -89 dBm @ 12 Mbps, -85 dBm @ 18 Mbps, -83 dBm @ 24 Mbps, -79 dBm @ 36 Mbps, -75 dBm @ 48 Mbps, -74 dBm @ 54 Mbps |
| • protocol support: |
|
| General Protocols | Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, PPPoE, DHCP |
| AP-only Protocols | ARP, BOOTP, DHCP, STP/RSTP (IEEE 802.1D/w) |
| • Interface: |
|
| Default Antenna | 2 dual-band omni-directional antennas, 5 dBi at 2.4 GHz, 2 dBi at 5 GHz, N-type (male) |
| Connector for External Antennas | N-type (female) |
| LAN Ports | 2, 10/100BaseT(X), auto negotiation speed (waterproof RJ45-type) |
| Console Port | RS-232 (waterproof RJ45-type) |
| LED Indicators | PWR, FAULT, STATE, WLAN1, WLAN2, LAN1, LAN2 |
| Alarm Contact (digital output, M12 female connector) | 1 relay output with current carrying capacity of 1 A @ 24 VDC |
| Digital Inputs (M12 female connector) | 2 electrically isolated inputs • +13 to +30 V for state “1” • +3 to -30 V for state “0” • Max. input current: 8 mA |
| • Physical Characteristics: |
|
| Housing | Metal, IP68 protection |
| Weight | 1.8 kg |
| Dimensions | 224 x 147.7 x 64.5 mm (8.82 x 5.82 x 2.54 in) |
| Installation | Wall mounting (standard), DIN-Rail mounting (optional), pole mounting (optional) |
| • Environmental limits: | |
| Operating Temperature | -40 to 75°C (-40 to 167°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5% to 100% (non-condensing) |
| • power requirements: | |
| Input Voltage | 12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet (IEEE 802.3af compliant) |
| Connector | M12 male connector with A-coding |
| Power Consumption | • 12 to 48 VDC, 800 mA (max.) • 12 to 48 VDC, 1.066 to 0.312 A |
| Reverse Polarity Protection | Present |
| • standards and certifications: |
|
| Safety | UL 60950-1, EN 60950-1 |
| Hazardous Location | UL/cUL Class I Division 2, ATEX Zone 2 (Pending) |
| EMC | EN 301 489-1/17, FCC Part 15 Subpart B Class B, EN 55022/55024 |
| Radio | EN 300 328, EN 301 893, DSPR (Japan) |
| Rail Traffic | EN 50155, EN 50121-1/4 |
| Note | Please check Moxa’s website for the most up-to-date certification status. |
| • reliability: |
|
| MTBF (mean time between failures) | 284,072 hours |
| • Warranty: |
|
| Warranty Period |
5 years |
| Details | See http://www.moxa.com/support/warranty.htm |
Available Models
| Ordering Info | Model No. | Description |
| Click here to order |
AWK-6222-T |
IEEE 802.11a/b/g outdoor dual-RF wireless AP/Bridge/Client, -40 to 75°C operating temperature |
Adaptor
| Ordering Info | Model No. | Description |
| Click here to order |
A-ADP-RJ458P-DB9F-ABC01 |
RJ45-to-DB9 adaptor for the ABC-01 |
Mounting Kits
| Ordering Info | Model No. | Description |
| Click here to order |
DK-DC50131-01 |
DIN-Rail mounting kit |
2.4 GHz WLAN Antennas
| Ordering Info | Model No. | Description |
| Click here to order |
ANT-WSB-ANF-09 |
2.4 GHz,omni-directional antenna, 9 dBi, N-type (female) |
| Click here to order |
ANT-WSB-PNF-12 |
2.4GHz, Directional/Panel antenna, 12dBi, N-type (female) connector |
2.4 and 5 GHz WLAN Antennas
| Ordering Info | Model No. | Description |
| Click here to order |
ANT-WDB-ANM-0407 |
2.4/5 GHz, dual-band omni-directional antenna, 4/7 dBi, N-type (male) |
| Click here to order |
ANT-WDB-ANM-0609 |
2.4/5 GHz, dual-band omni-directional antenna, 6/9 dBi, N-type (male) |
| Click here to order |
ANT-WDB-ANM-0502 |
2.4/5 GHz, dual-band omni-directional antenna, 5 dBi, N-type (male) |
| Click here to order |
ANT-WDB-ANF-0609 |
2.4/5 GHz, dual-band omni-directional antenna, 6/9 dBi, N-type (female) |
| Click here to order |
ANT-WDB-PNF-1518 |
2.4/5 GHz, dual-band panel antenna, 15/18 dBi, N-type (female) |
| Click here to order |
ANT-WDB-ANF-0407 |
2.4/5 GHz, dual-band omnidirectional antenna, 4/7 dBi, N-type (female) |
5 GHz WLAN Antennas
| Ordering Info | Model No. | Description |
| Click here to order |
ANT-WSB5-ANF-12 |
5 GHz, omni-directional antenna, 12 dBi, N-type (female) |
| Click here to order | ANT-WSB5-PNF-18 | 5 GHz, panel antenna, 18 dBi, N-type (female) |
Cable
| Ordering Info | Model No. | Description |
| Click here to order |
A-CRF-NMNM-LL4-300 |
LMR-400 Lite cable, N-type(male) to N-type (male), 3 m |
| Click here to order |
A-CRF-NMNM-LL4-600 |
LMR-400 Lite cable, N-type(male) to N-type (male), 6 m |
| Click here to order |
A-CRF-NMNM-LL4-900 |
LMR-400 Lite cable, N-type(male) to N-type (male), 9 m |
| Click here to order |
CRF-N0429N-3M |
CFD400 cable, N-type (male) to N-type(male), 3 m |
Cap
| Ordering Info | Model No. | Description |
| Click here to order |
A-CAP-M12M-M |
Metal cap for M12 male connector |
| Click here to order |
A-CAP-M12F-M |
Metal Cap for M12 Female Connector |
| Click here to order |
A-CAP-N-M |
Metal cap to cover N-type connector |
| Click here to order |
A-CAP-WPRJ45-MC |
Metal cap with chain for RJ45 connector |
Connector
| Ordering Info | Model No. | Description |
| Click here to order |
A-PLG-WPRJ |
Field-installation RJ-type plug |
| Click here to order |
CBL-M12DFF4PRJ45-BK-10-IP67 |
M12-to-RJ45 Cat-5E UTP Ethernet cable with IP67-rated female 4-pin D-coded M12 connector |
| Click here to order |
M12A-5P-IP68 |
Field-installation A-coded screw-in power connector, 5-pin female M12 connector, IP68-rated |
| Click here to order |
M12A-8PMM-IP68 |
Field-installation A-coded screw-in Gigabit Ethernet connector, 8-pin male M12 connector, IP68-rated |
Mounting Kit
| Ordering Info | Model No. | Description |
| Click here to order |
PK-DC2DOF |
Pole Mounting Kit |
| Click here to order |
WK-55 |
Wall Mounting Kit, 55mm High |
Terminator
| Ordering Info | Model No. | Description |
| Click here to order |
A-TRM-50-NM |
Termination resistor, 50 ohms, N-type male |
Arrestor
| Ordering Info | Model No. | Description |
| Click here to order | A-SA-NMNF-01 | A-SA-NMNF-01 |
Power Cords
| Ordering Info | Model No. | Description |
| Click here to order | CBL-M12(FF5P)/Open-100 IP67 | 1-meter A-coded M12-to-5-pin power cable, 5-pin female M12 connector, IP67-rated |
