Features and Benefits

• World's lowest power consumption, only 1 W
• Speedy 3-step web-based configuration
• Surge protection for serial, Ethernet, and power lines
• COM port grouping and UDP multicast applications
• Screw connectors for secure installation
• Real COM/TTY drivers for Windows and Linux
• Standard TCP/IP interface and versatile TCP and UDP operation modes

Overview

The Moxa  NPort 5100A serial device servers are designed to make serial devices network-ready in an instant and give your PC software direct access to serial devices from anywhere on the network. The NPort 5100A device servers are ultra lean, ruggedized, and user friendly, making simple and reliable serial to Ethernet solutions possible.

A Greener Serial-to-Ethernet Solution

The Moxa MiiNe is a small but powerful ARM-based serial-to-Ethernet SoC with RAM and Flash embedded. With the MiiNe inside, the NPort 5100A series becomes the world's only device server with power consumption less than 1 W. The NPort 5100A series saves at least 50% on power consumption compared to existing solutions on the market, helping engineers meet the tough environmental compliance challenges found in today's industrial environments.

Surge-protected Serial, Ethernet, and Power Lines

Surge, which is typically caused by high voltages that result from switching and lightning transients, is a common threat to all electrical devices. Moxa's leading-edge surge immunity solution, which is applied to the NPort 5100A's serial, power, and Ethernet lines, is tested and proven compliant with IEC 61000-4-5. This state-of-the-art surge protection provides a robust serial-to-Ethernet solution that can protect electrical devices from voltage spikes and withstand electrically noisy environmental conditions.

3-Step Web-based Configuration

The NPort 5100A's 3-step web-based configuration tool is straightforward and user-friendly. The NPort 5100A's web console guides users through 3 simple configuration steps that are necessary to activate the serial-to-Ethernet application. With this speedy 3-step web-based configuration, a user only needs to spend an average of 30 seconds to complete the NPort settings and enable the application, saving a great amount of time and effort.

Easy to Troubleshoot

NPort 5100A device servers support SNMP V2, which can be used to monitor all units over Ethernet. Each unit can be configured to send trap messages automatically to the SNMP manager when user-defined errors are encountered. For users who do not use SNMP manager, an e-mail alert can be sent instead. Users can define the trigger for the alerts using Moxa's Windows utility, or the web console. For example, alerts can be triggered by a warm start, a cold start, or a password change.

• Ethernet Interface
Number of Ports	1
Speed	10/100 Mbps, auto MDI/MDIX
Connector(s)	8-pin RJ45
Magnetic Isolation Protection	1.5 KV built-in

• Serial Interface
Number of Ports	1
Serial Standards	NPort® 5110A: RS-232 NPort® 5130A: RS-422/485 NPort® 5150A: RS-232/422/485
Connector(s)	DB9 male
Serial Line Protection	15 KV ESD protection for all signals, Level 1 Surge, EN61000-4-5
RS-485 Data Direction Control	ADDC® (automatic data direction control)
Pull High/Low Resistor for RS-485	1 KΩ, 150 KΩ

• Serial Communication Parameters
Data Bits	5, 6, 7, 8
Stop Bits	1, 1.5, 2
Parity	None, Even, Odd, Space, Mark
Flow Control	RTS/CTS and DTR/DSR (RS-232 only), XON/XOFF
Baudrate	50 bps to 921.6 Kbps

• Serial Signals
RS-232	TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422	Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w	Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w	Data+, Data-, GND

• Software
Network Protocols	ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, IGMP V1/2
Configuration Options	Web Console (with new Quick Setup), Serial Console (NPort 5110A/5150A only), Telnet Console, Windows Utility
Windows Real COM Drivers	Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7 x86/x64
Fixed TTY Drivers	SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac 10.3
Linux Real TTY Drivers	Linux kernel 2.4.x, 2.6.x

• Physical Characteristics
Enclosure	Metal
Weight	340 g
Dimensions	Without ears: 52 x 80 x 22 mm (2.05 x 3.15 x 0.87 in) With ears: 75.2 x 80 x 22 mm (2.96 x 3.15 x 0.87 in)

• Environmental Limits
Operating Temperature	Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)

• Power Requirements
Input Voltage	12 to 48 VDC
Power Consumption	NPort® 5110A: 82.5 mA @ 12 V, 47.3 mA @ 24 V NPort® 5130A: 89.1 mA @ 12 V, 49.5 mA @ 24 V NPort® 5150A: 92.4 mA @ 12 V, 52.8 mA @ 24 V

• standard and certifications
Safety	UL 60950-1, EN 60950-1
EMC	CE, FCC
EMI	EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS	EN 55024
Power Line Protection	Level 2 Burst (EFT), EN 61000-4-4 (Surge) Level 3, EN 61000-4-5

• Reliability
Automatic Reboot Trigger	Built-in WDT (watchdog timer)
MTBF (mean time between failures)	2,231,530 hrs

• Warranty
Warranty Period	5 years
Details	See http://www.moxa.com/support/warranty.htm

Ordering Info	Model No.	Description
Click here to order	NPort 5110A	1-port RS-232 device server, 0 to 60°C operating temperature
Click here to order	NPort 5130A	1-port RS-422/485 device server, 0 to 60°C operating temperature
Click here to order	NPort 5150A	1-port RS-232/422/485 device server, 0 to 60°C operating temperature
Click here to order	NPort 5110A-T	1-port RS-232 device server, -40 to 75°C operating temperature
Click here to order	NPort 5130A-T	1-port RS-422/485 device server, -40 to 75°C operating temperature
Click here to order	NPort 5150A-T	1-port RS-232/422/485 device server, -40 to 75°C operating temperature

Ordering Info	Model No.	Description
Click here to order	PWR-12150-AU-T1	12V1.5A, -40 to 75°C operating temperature, Screw type AC power jack, AU plug

Ordering Info	Model No.	Descritpion
Click here to order	DK-35A	DIN-Rail Mounting Kit (35 mm)